MP3 cable holder. For this purpose please proceed as follows:
1. Use the enclosed Allen Wrench to remove both Allen screws from
Helmet clamp and release the clamp’s back plate.
2. Place the MP3 cable holder on the
helmet clamp. Both pins on the
MP3 cable holder should be xed
into corresponding indentations on
clamp.
3. Place the Back Plate on top of the
MP3 cable holder and secure all
parts together using the Allen
screws that were previously removed, as shown in photo.
4. Attach the clamp and headset onto your helmet as described
previously in section “ATTACHING THE CLAMP ON THE HELMET”.
5. Attach the speakers to your helmet as described in section
”POSITIONING THE SPEAKERS”.
6. Connect the MP3 cable to your MP3 player device’s jack and the
other side to the helmet Clamp’s jack, inserting the cable through
the MP3 cable holder.
Make sure that the cable plug clicks
into place.
7. Tuck the MP3 cable into the hook of
the MP3 cable holder.
8. In order to use your MP3 player,
power on the headset to have it on Standby mode, ashing slowly
in Blue.
MP3 cable holder hook
NOTE: Operate the MP3 Player device by using its buttons (FF/REW/
PLAY/PAUSE).
Volume can only be adjusted through the MP3 Player. Any other
audio connection (Phone call/Intercom call) will automatically
mute the MP3 Player. The audio signal will return only when
headset is once again in Standby mode.
DRIVER’S UNIT FUNCTIONS
USING THE HEADSET
G E N E R A L F U N C T I O N S
DESIRED RESULT: REQUIRED ACTION:
Turn on the
headset
Press the CTRL Button steadily for at least 6 seconds.
Led indication: three blue ashes.
Audio feedback: Ascending tone (low-high).
Turn o the
headset
Press the CTRL Button steadily for at least 3 seconds.
Led indication: three red ashes.
Audio feedback: Descending tone (high-low).
Increase volume Tap the Volume Up Button
Decrease volume Tap the Volume Down Button
AGC (Automatic Gain Control): In addition to manual Volume Control,
the scala rider TeamSet will automatically increase and reduce its
volume according to ambient noise and driving speed.
INITIATING AND RECEIVING MOBILE
PHONE CALLS
Voice Recognition (VR)
The VR feature allows you to answer or reject incoming calls by voice
Control without having to remove your hands from the handlebars.
8
scala rider
®
TeamSet
™
(10 strony)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji